ECCO 3VM-DRO-3 Vertical Turret Milling Machine

ECCO YS-2VS-DRO Vertical Turret Milling Machine







Specifications

  • Table: 10 in. x 54 in.
  • Table T-Slots: 3 in. x 5/8 in.
  • X Travel: 36 in.
  • Y Travel: 15 in.
  • Z Travel: 16 in.
  • Spindle Quill Travel: 5 in.
  • Spindle Feedrate: .0015 in./.003 in./.006 in./rev
  • Spindle Taper: R-8
  • Spindle Center to Column Surface: 6-3/4 in. to  29-3/4 in.
  • Spindle Nose to Table Surface: 0″ to 18-1/2″
  • Head Swivel 45 deg. Tilt: Forward & Backward
  • Head Swivel 90 deg. Swivel: Right & Left
  • Ram Travel: 20 in.
  • Spindle Speed (R.P.M.) Vari-Speed: 70 to 4200 RPM

Options Included:

  • Meehanite Casting
  • X, Y & Z Axes Slideway Hardened & Ground
  • Table Top Hardened & Ground
  • Coolant pump
  • Chip tray
  • Halogen light 24 volt
  • FOIC 2-Axis DRO
  • Align Power Feed Al-500S on X-Axis
  • Align Power Feed Al-500S on Y-Axis
  • Rapid Traverse Motor on Z-Axis with 8 button control panel
  • Power Draw Bar
  • Electric Options: 3 HP, 220V, Single Phase, 30 AMP (Single Phase als available)
  • Dimensions: 87" H x 65" W x 54" L
  • Weight: 2,090 Lbs.
  • Warranty: 1 Year.
  • Delivery: In Stock.

Specifications are subject to change without notice.