Come and visit us MAY 15, 2019 AT THE TRADEX in Abbotsford for the MMP EXPO from 9am to 4pm!

We will be displaying an EDWARDS 55 Ton Ironworker and much more!

Attend Metalworking Manufacturing & Production Expo

Everyone knows we don’t get much snow in the lower mainland. This past week we got 10 to 15 cm depending where you were in the region. We still managed to load these three machines: a RAS SmartCut CNC Shear and a RAS Turbobend CNC Folder going to Winnipeg, MB and an MVD A(F)02 CNC Shear going to Reed Deer, AB.

ECCO Machinery sells machines across Canada.

• Links here: RAS SmartCut CNC Shear: https://lnkd.in/eFHQHDi
• RAS Turbobend CNC Folder: https://lnkd.in/eP_iQBF
• MVD A(F)02 CNC Shear: https://lnkd.in/egAyt7z

At ECCO Machinery we provide machinery solutions for many industries.

For instance, we just shipped a MyDay Lathe 30″ Swing by 200″ long with a 9″ bore to a mine site in British Columbia. It will be used by their machine shop for servicing and repairs of their mining equipment. This is by far the largest lathe we have sold in BC.

Service comes first at ECCO Machinery™. Our customer in Saskatoon had a small accident and their lathe got damaged extensively. Our service tech, seen here in this picture, repaired the lathe and squared it up. It can make parts with a parallel accuracy of 1.017 microns/ft or 0.000040039″ (Paper is 100x thicker than this tolerance). ECCO Machinery strives to provide the best machinery sales and service experience in the industry.

HYDMECH makes the award winning S-20 Series Band Saws. ECCO Machinery sells and services HYDMECH Band Saws and all of its awesome products! This one was sold to one of our customers in Coquitlam, BC. If you are looking for good service, quick delivery and reliable machinery you found it!

Another happy customer! We just shipped a RAS Turbobend from Ras Systems and an ECCO H-12010-3 to Kamloops, BC.

RAS Turbobend: Click here for more details.

ECCO-H-12010-3 Hydraulic Shear: Click here for more details.

Great News! ECCO Machinery™ sells lots of machines! On Wednesday we loaded eight machines going to Edmonton, Alberta.

Machines Shipped:

• ECCO V-1016 Hand Brake
• ECCO O-5216 Foot Operated Squaring Shear
• TECNA Air Operated Spot Welder
• ECCO N-U4816 Box & Pan Hand Brake
• DuroDyne MF-12A Compact Pinspotter
• ECCO X-5016 Manual Slip Rolls
• RAMS 2011-C Floor Model Slitter
• Roper Whitney/Pexto 622 Hand Turning Machine.

Why go anywhere else? Great Prices, lots of machines in stock, best service in BC.

Kelly Shong, our BC Sales Representative, has just sold a pair of beauties from Scotchman Industries, Inc. in Surrey, BC. The Ironworker is a Scotchman Model 5014-ET Hydraulic Ironworker and the Cold Cut Saw is a Scotchman Model CPO-350 Cold Cut saw.

Edwards 55 Ton Ironworker: Click here for more details.

Edwards 110 Ton H-Frame Press: Click here for more details.

Click here for specs and more details!

The AMOB MDH-90CN2 Electric NC Tube Bender can do up to Ø 90 x 4 mm (5/32″ Wall Thickness), Max. Bending Radius: 305 mm (12 in.). 2nd one sold in BC!

Kahio Roofing Corp. <https://www.kahioroofing.com/> has just purchased a New Tech Machinery SSQ Roof Panel. They have also purchased a new Roper Whitney 10 Ft. 16 Gauge Hand Brake.

Machine Details:

• ECCO 5 x 10 CNC Router with 8-Tools Carousel Tool Changer
• Syntec Controller
• Yaskawa Servo Motors and Drives
• 230 V, 3 Phase
• CSA Approved
• Special Thanks to F&G Delivery Ltd.

 

Yes, ECCO Machinery sells and delivers machinery all across BC, AB and Saskatchewan. Contact us for more information!

Once again thanks to F&G and Fortress for helping us getting this machine loaded and shipped!

Thank you for your continued support. We wish you and your family all the best in 2018.

Lots of machines available in stock. All prices are in Canadian Funds, FOB ECCO Machinery.

---

Hyd-Mech Band Saws

HYD-MECH S-20P Semi-Automatic Scissor Style Band Saw – $19,500.00

HYD-MECH S-20 Manual Scissor Style Band Saw – $15,500.00

HYD-MECH DM-10 9.5” x 11” Manual Double Miter Band Saw – $10,600.00

ECCO Band Saws

RF-250NAA-3 Semi-Auto Band Saw with Hydraulic Vise (3 Phase and Single Phase Available) – $8,895.00

RF-250NA-3 Semi-Auto Band Saw (3 Phase and Single Phase Available) – $8,295.00

ECCO UE-250S-CSA 10” X 16” Band Saw (3 Phase) – $6,995.00

Roofing Folders and Shears

RAS 61.31 TURBObend CNC Folder (124″ x 16 ga.) – $95,000.00

RAS SMARTcut Swing Beam Shear – $47,000.00

ECCO Circular Saws

ECCO CS-350 Cold Cut Saw — ECCO Machinery Sales Website – $4,295.00

ECCO FHC-350D-L COLD CUT SAW — ECCO Machinery Sales Website – $6,295.00

Elumatec Circular Saws

Elumatec MGS 72 B Bench Model (Manual) — ECCO Machinery Sales Website – $6,895.00

ECCO Hydraulic Shears

ECCO H-5214 Hydraulic Shear (3 Phase and Single Phase Available) –  $7,995.00

ECCO H-12014 Hydraulic Shear – $23,995.00

Foot Shears

TENNSMITH MODEL 52 Foot Shear – $4,995.00

Tin Knocker 1652 Foot Shear – $3,995.00

Amob Tube and Pipe Benders

Amob PT76 Tube Bender – $17,495.00

Amob PT42 Tube Bender – $14,495.00

Amob MDH-35, 60, 90 Electric NC Tube Bender – MDH-90: Available as 2-Axis (MDH90CN2) – $85,495.00

Amob Roll Benders

AMOB MAH 50/2 Hydraulic Tube Bending Machine – $14,495.00

Rollformers

RAMS 2006 20ga Pittsburgh Machine, includes drive cleat rolls and Power Flanger – $8,695.00

RAMS 24-28 Pittsburgh Machine, includes drive cleat rolls and Power Flanger – $6,945.00

RAMS-2007-AA 20ga Stand Alone Power Flanger with Auto Adjust – $4,695.00

Tin Knocker TK 20ga Pittsburgh Machine w/Flanger – $7,695.00

Tin Knocker TK No. 20 Power Flanger – $3,695.00

Pin Spotters

DuroDyne FG MACH III Pinspotter – $13,495.00

DuroDyne MF-12A Compact Pinspotter – $3,495.00

Plate Rolls

ECCO R-0535H-G Hydraulic Initial Pinch Plate Rolls  – $15,995.00

Spot Welders

TECNA Air-Operated Spot Welder Series – $5,995.00

Hand Brakes

NATIONAL MODEL N9616 (8 FT. X 16GA) – $6,495.00 *Price Reduced

TENNSMITH HB97-16 Heavy Duty Hand Brake – $5,995.00 *Price Reduced

RAMS-1016-SB Sheet Metal Hand Brake – $4,995.00 *Price Reduced

CNC Plasma Tables

OMNI 5 x 10 CNC Plasma Cutting Table – $30,995.00

CNC Routers

OMNI “ECCO” 5 x 10 CNC ROUTER – $35,000.00

Used Machines: Click here to see some of our USED Machines available now!

---

Great Service!

Did you know that we have service techs available in BC, Alberta and Saskatchewan?

Call Darci Toll free 1-877-513-1773 to book a service call today!

Metal Machinery Services

---

In British Columbia call 778-298-2023, In Alberta call 780-905-8009, In Saskatchewan call 306-914-7176

 

Machine Specs:

• V202-W (60 Inch by 120 Inch Work Area) V Series Water Jet Gantry System w/ Integrated Cutting Tank
• INTENSIFIER PUMP, TRI-LINE 230VAC
• MultiCam Advanced CNC Interface
• Abrasive Hopper Single Head (SLVI & PRO)
• TRI LINE Full Tools
• IDE Head with Valve 12/36 5.75in NT 60K
• 4 Inch Slat Bed – 202 (V-Series Waterjet)
• KIT, TRI-LINE PUMP, STAND, WHIP
• EZ G-Code Creator 5 – Random Shape Nesting (Requires ADV EZ)
• EZ G-Code Creator 5 – Advanced Waterjet Feature
• EZ G-Code Creator 5 – Advanced EZ interface with MultiTool Control
• EZ G-Code Creator 5 – Common Line
• Ethernet Surge Protector CAT6
• CAT6A GREEN SHIELDED ETHERNET CABLE 25FT
• System includes MultiCam EZ Control and EZ Suite software Connection Manager, Job Name Server, Job Editor, and Job Reporter.
• MACHINE VOLTAGE 220V 1PHASE
• 80 HPX BARTON GARNET 2200# SAMPLE Domestic Only

We successfully delivered another HACO HSLX 3008 10 Ft x 5/16″ in Langley, BC.

Like what you see? See the specs for this shear here: HACO Shear Page.

Announcing NTM’s Summer Special!

Get a FREE 2ND PANEL PROFILE with the purchase of an SSQ, SSH or SSR Portable Roof Panel Machine!

If a 2nd profile is not desired …

• Get a FREE PLC Controller with an SSQ purchase, or …
• Get an upgraded NTM 100 Controller with an SSH purchase, or …
• Get an EZC EZ Counter Digital Length Controller with an SSR purchase.

The special is available through July 31, 2017.

Also, save on MACH II Gutter Machines!

 

New VK Series

• For many years, Milltronics offered the VK Series of CNC knee mills
• Very popular in tool rooms, prototype, R & D and job shops as offered with true 3-axis control and unique MillSlide Z axis
• Milltronics installed more than 1,500 CNC knee mills by the time production was suspended in 2013
• Now pleased to announce the VK is back – with more than two dozen improvements at about the same price
• Features the Milltronics Series 8200-B control

VK Series = Flexibility

• Full three-axis 8200-B CNC control (same as on VMC’s)
• Conversational, G-code or CAM system
• Yaskawa servos and drives
• Unique Milltronics MillSlide provides greater rigidity and more spindle nose to table top
• Can be run as full CNC, semi-CNC (manual quill) or full manual
• Head tilts +/- 90 degrees
• Ram travel +/- 11.5” (from centerline)
• Ram swivels +/- 90 degrees
• Standard handwheels are directly coupled to ballscrews and provide feedback to operator

Milltronics VK Series Announcement – June 1, 2017 or Download PDF for more information.

We delivered another OMNI CNC Router in Richmond this time.

This is a 5 x 10 CNC Router with the following specs:

• X, Y, Z Working area: 59 in. x 118 in. x 7 in. (1500 mm x 3000 mm x 200 mm) Table size 1750 x 3590 mm
• 2 Italian HSD air-cooled spindles 3kw and 6kw
• 2 Frequency Inverter Taiwan Delta frequency inverters
• Machine table Bakelite combined with Aluminum T-slot extrusion, vacuum table
• Drive and motor Japan Yaskawa servo motor and driver 850W
• X, Y, Z Travelling Positioning Accuracy ±0.03/300mm
• X, Y, Z Travelling Repositioning Accuracy ±0.02mm
• Frame Big thickened Steel Square Tubes, thickness up to 8mm
• X, Y structure Rack and pinion drive, Hiwin square rail linear bearing
• Z axis structure Taiwan TBI ball screw and Hiwin square linear rail
• Max Rapid Travel Rate 50,000mm/min
• Max working speed 20,000mm/min
• Working voltage AC220V/60Hz, 3 phase
• Command languages G code
• Vacuum pump 7.5kw dry vacuum pump
• Mist sprayer
• Dust collecting system 3kw dust collector with hood
• Control system DSP control system with USB interface

Issue Reported: Hyd Mech T25 Horizontal Band Saw drive wheel locating bolts breaking.

Issue Cause: Worn-out drive wheel shaft.

Stage 1) Removed Gearbox assembly from Hyd Mech Band Saw, brought it back to our Machine Shop in Surrey, BC:

Stage 2) Gearbox taken apart, washed on parts washer, sand blasted and prepared for painting:

Stage 3) Parts painted, shaft re-surfaced, new shaft built at Langley Machine Shop:

Stage 4) Parts painted, shaft re-surfaced, new shaft built at Langley Machine Shop, Reassembled:

For more information in BC, Alberta or Saskatchewan call 1-877-513-1773 or complete the form below & we’ll get back to you.

We welcome David Golls, our new Alberta/Saskatchewan Sales Representative, to our winning team!

David’s 10+ years of experience selling machinery in the Alberta Territory is backed by two trade certifications as a Journeyman Machinist and a Millwright.

Customer-service focused and continuous attention to detail combined with his experience and effective communication style provide him with the necessary skills to work well with all members of an organization from the shop floor right up to the CEO/Owners.

You may reach David by email: dgolls@eccomachinery.com and on his mobile phone: 780-905-8009 or 778-237-8009.

Huge Inventory of Machines In Stock

HYDMECH S-20A Automatic Scissor Style Band Saw

$34,795.00 CAD – FOB ECCO MACHINERY

ECCO RF-250NA 10″ x 18″ Horizontal Swivel Band Saw

$6,995.00 CAD – FOB ECCO MACHINERY

BAILEIGH INDUSTRIAL ROTARY DRAW BENDER – RDB-125

$7,295.00 CAD – FOB ECCO MACHINERY

TECNA Air-Operated Spot Welder Series

$5,895.00 CAD – FOB ECCO MACHINERY

ECCO R-0535H-G Hydraulic Initial Pinch Plate Rolls

$15,995.00 CAD – FOB ECCO MACHINERY

Lots of Used machinery available as well. Tell us what you are looking for and we will find it for you.

Roofing Season is here!

RAS SMARTcut Swing Beam Shear – 122” long 14 gauge Machine with manual backgauge

The perfect partner for the RAS TURBObend or TURBObend plus folding machine is the RAS 52.30 Swing Beam Shear. With a capacity of 14 gauge mild steel and 18 gauge stainless, this machine can handle a wide variety of tasks.

RAS SMARTcut Swing Beam Shear

$38,110.00 USD – FOB ECCO MACHINERY

RAS TURBObend CNC Folder – 124” 16 ga mild steel with 15” CNC Control

The TURBObend was designed for roofing, architectural and metal construction markets. The machine is designed as a welded steel construction. All components are designed by finite element analysis for maximum rigidity. This state-of-the-art design criteria guarantees a long machine life and very accurate parts, if used appropriately within specifications.

RAS 61.31 TURBObend CNC Folder (124″ x 16 ga.)

$72,285.00 USD – FOB ECCO MACHINERY

South Korea’s premier laser manufacturer is recreating its brand image to coincide with the completion of their new facility in Korea.

Starting on Aug. 1st 2014, the name of Han-Kwang will be changed to HK Laser & Systems. A new logo will also accompany the change. This change is not just about creating a new name or logo, but to change the general image of the company.

With the success of expanding to different markets all over the world, and the imminent completion of the plant #2 this November, HK Laser & Systems hopes to breathe new life to their brand. The new logo will especially help the North American market because of its simple but sharp features. Customers will no longer have to struggle with pronouncing the name of the company.

HK Laser & Systems was founded 25 years ago based in South Korea and has produced more than 2000 quality laser machines. The company will continue to expand in North America. The rebranding of the company name is just the beginning of their aggressive business plan to provide customers with quality machines and excellent service.

Large Machinery Order is arriving soon. We need to make room, you benefit from great deals on Used Machinery!

Call today! 778-298-2023 If you don’t see the used machinery that you are looking for among the following, just give us a call, as we have many more in stock.

After 25 years of manufacturing state-of-the-art systems for metal fabrication, Han-Kwang has learned how to keep customers happy. They consistently create the most advanced machines for speed and precision, and offer industry-leading service and support.

If you’re in the market for a new, fully-loaded CO2 or fiber laser to enhance your facility’s results, call us today at 1-877-513-1773.

To celebrate Han-Kwang’s anniversary, ECCO Machinery™ is offering exclusive discounts on three of their high-end flying-optics laser cutting systems. This is a very special limited-time offer, so don’t miss out.

Han-Kwang Laser specialist coming soon to a location near you!

ECCO Machinery™ is currently booking appointments in British Columbia and Alberta for onsite visits/ assessment done by Han-Kwang’s Laser specialist who will be available for personal drop-ins to assess your requirements and to answer any questions you may have on their machinery. Please call before the end of this week!

“When we need another laser-leading machine, quality, application assistance, and training will lead us to another Han-Kwang.”

FS 3015/SE-2.5kw CO2 Laser

• Panasonic type-10 2.5kw CO2 laser
• B&R control
• S5 HK cutting head w/ 5″ and 7.5″ FL cartridge
• AFC adaptive optical system
• Quick piercing
• Automatic Nozzle Cleaner
• Automatic Dual shuttle tables
• Rapid traverse speed up to 6,700 IPM
• Cut mild steel up to 0.750″
• Cut stainless up to 0.375″
• Cut aluminum up to 0.250″

FS 3015/SE-4.0kw CO2 Laser

• Panasonic type-10 4kw CO2 laser
• S5 HK cutting head w/ 5″ and 7.5″ FL cartridge
• AFC adaptive optical system
• Quick piercing
• Automatic Nozzle Cleaner
• Rapid traverse speed up to 6,700 IPM
• Cut mild steel up to 1.000″
• Cut stainless up to 0.625″
• Cut aluminum up to 0.375″

FS 3015/SE-2.0kw IPG Fiber Laser

• IPG 2.0kw Fiber laser
• Precitec cutting head
• Motorized focus control
• 5″ and 7.5″ FL cartridges
• Rapid traverse speed up to 6,700 IPM
• Cut mild steel up to .500″
• Cut stainless up to .315″
• Cut aluminum up to 0.315″
• Cut brass up to .250″

You probably already know what phase/voltage you have in your facility, but you shouldn’t take your power for granted. Specifications should always be double-checked before you make a decision on which machine you should buy.

Most of the machines we have in our extensive product line come with Single-Phase or Three-Phase motors and different voltages.

FACT 1: SINGLE-PHASE THREE WIRE

Single-phase electrical service wires usually have a three wire configuration, also known as the Edison system or the center-tapped neutral. This type of single-phase wiring is most commonly found in Canada and the United States. It provides 120 volts for lighting and conventional plug loads and 240 volts for single-phase appliances, such as water heaters and air conditioners.

FACT 2: SINGLE-PHASE THREE WIRE

Three-phase installations provide a smooth and reliable wavelength that many industrial and high-voltage appliances, such as saw mills, air conditioners and refrigeration systems, require to operate. This makes three-phase electrical service popular in commercial and industrial buildings which need to operate voltage-hungry machinery. There are two commonly used three-phase electrical service wiring types: the four-wire Wye and the three-wire Delta. The Wye electrical service is by far the most common in the United States.It has a neutral wire which also allows it to be used for single-phase appliances. The Delta system provides service voltages ranging from 208 to 600 and higher, which explains why it is mostly used in industrial facilities.

Q: What if the machine I am looking for only comes in single-phase or three-phase or some other different voltage?

A: You can use Rotary Phase/Roto Phase Converters and Transformers.

Rotary Phase Converters (to go from Single Phase to Three Phase or vice-versa):

A phase converter is a device that converts electric power provided as single phase to multiple phase or vice-versa.The majority of phase converters are used to produce three-phase electric power from a single-phase source, thus allowing the operation of three-phase equipment at a site that only has single-phase electrical service. Phase converters are used where three-phase service is not available from the utility, or is too costly to install due to a remote location. A utility will generally charge a higher fee for a three-phase service because of the extra equipment for transformers and metering and the extra transmission wire.

Transformers (to go from higher voltage to lower voltage or vice-versa):

A transformer is an electrical device that transfers energy between two circuits through electromagnetic induction. A transformer may be used as a safe and efficient voltage converter to change the AC voltage at its input to a higher or lower voltage at its output without changing the frequency. Other uses include current conversion, isolation with or without changing voltage and impedance conversion.

New Website Design!