Birmingham Rong Fu RF-19 Drill Press

Specifications:

• Motor: 2HP, 1 phase 110 volt or 220 volt or 3 phase 220 volt
• Spindle Speeds: (12) 120 to 2500 rpm
• Spindle Taper : R8
• Spindle/Quill Travel: 5-1/8"
• Spindle to column: 5-1/2"
• Working Table: 8.25" x 28.75"
• Table Longitudinal X travel: 18-1/8"
• Table Cross Y Travel: 6-1/4"
• Shipping weight: 700 Lbs

Capacity:

• Drilling - 1.25" (steel)
• Tapping - 1/2" (steel)
• End mill: 3/4"
• Face mill - 4"

Standard Accessories:

• 3.5" angle type drill press vise
• 1/2" drill chuck w/key
• Drill chuck arbor R8/JT6
• 3" face cutter
• Shell mill arbor
• Forward/reverse drum switch
• Draw bar
• Manufactured in Taiwan

[top]

Birmingham Rong FU RF35 Drill Press

Specifications:

• Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase
• 5 speed spindle: 340, 660, 1060, 1665, 3000 rpm
• Spindle Taper : MT3
• Spindle travel: 5"
• Spindle horizontal travel: 14.87"
• Spinde to table - Min: 6.5"
• Spindle to table - Max: 24"
• Spinde to column - Min: 6"
• Spindle to column - Max: 20.87"

Capacity:

• Drilling - 1.25" (steel)
• End mill: 3/4"
• Face milling - 3"

Options available:

• Cabinet with chip pan
• 52 piece clamping kit
• Work light
• Floor type coolant system

[top]

Birmingham Rong Fu RF-40 Geared Head Drill-Mill

Specifications:

• Head tilts 90° left and 45° right and swivels
• Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase
• 5 speed spindle: 60, 130, 230, 450, 1500 rpm
• Spindle Taper : R8
• Spindle/Quill Travel: 5-1/8"
• Spindle to column: 6.5"
• Spindle to table (max): 18.5"
• Table Longitudinal X travel: 19.75"
• Table Cross Y Travel: 9"
• Shipping weight: 650 Lbs

Capacity:

• Drilling - 1.25" (steel)
• End mill: 3/4"
• Face mill - 4"
• Standard Accessories: 1/2" drill chuck w/key
• Drill chuck arbor MT3/JT6
• Forward/reverse switch
• Table with standard T-slots
• Manufactured in Taiwan

Options available:

• Cabinet with chip pan
• Power down feed
• 52 piece clamping kit
• Work light
• Floor type coolant system
• Digital readout

[top]

Birmingham Rong Fu RF-40 Geared Head Drill-Mill

Specifications:

• Extra heavy duty square column design
• Head tilts 90° left and 45° right
• Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase
• 5 speed spindle: 60, 130, 230, 450, 1500 rpm
• Spindle Taper : R8
• Spindle/Quill Travel: 5-1/8"
• Spindle to column: 10"
• Spindle to table (max): 18.5"
• Table Longitudinal X travel: 20.5"
• Table Cross Y Travel: 8.25"
• Shipping weight: 800 Lbs

Capacity:

• Drilling - 1.25" (steel)
• End mill: 3/4"
• Face mill - 4"
• Standard Accessories: 1/2" drill chuck w/key
• Drill chuck arbor MT3/JT6
• Forward/reverse switch
• Table with standard T-slots
• Manufactured in Taiwan

Options available:

• Cabinet with chip pan
• Power down feed
• 52 piece clamping kit
• Work light
• Floor type coolant system
• Digital readout

[top]

Birmingham Radial Drill Press

Specifications:

• Extra Auxiliary Dial for Spindle Feed Depth
• Arm Raising and Limit Safety Devices
• Spindle Balance Mechanism
• Coolant Pump
• Work Light
• Box Table
• Tool Set

See Model specifications below

[top]