Baileigh Inverter Driven Drill Press

220 Volt Single Phase Inverter Driven Drill Press. Manual Feed. 1" Mild Steel Drilling Capacity.MT #3 Spindle Taper. Quill Diameter 2-7/16".Quill Travel 5.3".Variable Spindle Speeds (150 to 3000 RPM). 5/8" Mild Steel Tapping Capacity. Includes Digital RPM Tachometer, Coolant System, and Work Light.

Specifications:

• Drill Capactiy Steel 1"
• Drill Capacity Cast Iron 1.25"
• Tapping Capacity Steel 5/8"
• Tapping Capacity Cast Iron 3/4"
• Spindle Speed 150 - 3000 rpm
• Swing 16"
• Spindle Taper mt3
• Spindle Travel 5.3"
• Spindle Nose to Table 23.8"
• Spindle Nost to Base 45.3"
• Quill Diameter 2.44"
• Column Diameter 3.62"
• Table Dimensions (L/W) 18.1" / 14.2"
• Table Slot 5/8"
• Base Dimensions (L/W) 27" / 19"
• Motor Main 2 hp
• Motor Coolant 1/8 hp
• Power Requirements 220 volt / 3 phase
• Shipping Dimensions (L/W/H) 32" / 24" / 79"
• Shipping Weight 579 lbs

[top]

Baileigh DP-1250VS Inverter Driven Drill Press

220 Volt Single Phase Inverter Driven Drill Press. Manual Feed. 1-1/4" Mild Steel Drilling Capacity.MT #4 Spindle Taper. Quill Diameter 3".Quill Travel 6".Variable Spindle Speeds (65 to 2000 RPM) .3/4" Mild Steel Tapping Capacity. Includes Digital RPM Tachometer, Coolant System, and Work Light.

Specifications:

• Drill Capacity 1 1/4"
• Tapping Capacity 3/4"
• Spindle Speed High 245 - 2000 rpm
• Spindle Speed Low 85 -540 rpm
• Swing 20.8"
• Spindle Taper mt #4
• Spindle Travel 5.9"
• Spindle Nose to Table 36.41"
• Spindle Nost to Base 48.22"
• Quill Diameter 2.95"
• Column Diameter 4.52"
• Table Dimensions (L/W) 22" / 18.5"
• Table Slot 5/8"
• Base Dimensions (L/W) 27" / 19"
• Motor Main 2 hp
• Power Requirements 220 volt / 3 phase
• Shipping Weight 847 lbs

[top]

Baileigh DP-1500VS Inverter Driven Drill Press

220 Volt Single Phase Inverter Driven Drill Press.3 Speed Power Down Feed. 1-1/2" Mild Steel Drilling Capacity.MT #4 Spindle Taper.Quill Diameter 3".Quill Travel 6".Variable Spindle Speeds (65 to 2000 RPM).15/16" Mild Steel Tapping Capacity. Includes Digital RPM Tachometer, Coolant System, and Work Light.

Specifications:

• Drill Capacity Steel 1.5"
• Drill Capacity Iron 1.5"
• Tapping Capacity 15/16"
• Spindle Speed High 245 - 2000 rpm
• Spindle Speed Low 85 -540 rpm
• Swing 20.8"
• Spindle Taper mt #4
• Spindle Travel 5.9"
• Spindle Nose to Table 22.75"
• Spindle Nost to Base 40.75"
• Quill Diameter 2.95"
• Quill Feed (3 speeds) .0078”/rpm, .004”/rpm, ..002”/rpm
• Column Diameter 4.52"
• Table Dimensions (L/W) 22" / 18.5"
• Table Slot 5/8"
• Base Dimensions (L/W) 27" / 19"
• Motor Main 2 hp
• Power Requirements 220 volt / 3 phase
• Shipping Weight 902 lbs

[top]

Baileigh DP-1500G Gear Driven Drill Press

220 Volt Three Phase Gear Driven Drill Press. Power Feed.1-1/2" Mild Steel Drilling Capacity.MT #4 Spindle Taper. Quill Diameter 2-3/4".Quill Travel 7.5".8 Spindle Speeds (108 to 1800 RPM).1.229" Mild Steel Tapping Capacity. Includes Coolant System and Work Light

Specifications:

• Drill Capacity Mild Steel 1-1/2"
• Tapping Capacity m33
• Spindle Speed 108 – 1800 rpm
• Spindle Taper mt 4
• Spindle Travel 7.48"
• Table Dimensions (L/W) 19.5” / 28”
• Base Dimensions (L/W) 19.5” / 28”
• Motor Main 3.5 hp
• Power Requirements 220 volt / 3 phase
• Shipping Weight 682 lbs

[top]

E.&O.E.