ECCO Model UE-712SG-CSA Horizontal Band Saw

General Specifications:

• Motor – 1 HP
• Electrics; 120/220/volt 1 phase 60HZ
• Swivel head
• 3 Speed
• CSA Approved
• CSA Magnetic switch & wires
• Gear transmission
• Complete with coolant system
• Blade size – ¾” x .031” x 93”
• Dimensions – 48 ¾” x 24 ½” x 44 ½”
• Weight – 396 lbs

Capacity:

• Rounds at 90 degrees – 7”
• Rectangular at 90 degrees – 7” x 10 ¼”
• Rounds at 45 degrees – 4.12”
• Rectangular at 45 degrees – 4 ¾’’ x 4 1/8’’

[top]

ECCO Model UE-916V-CSA Horizontal Band Saw

Features:

• Rigid cast iron cutting head and vise base that allows it to cut though 9” metal with ease
• This bandsaw comes with four speeds that allow the operator to cut various materials like plastic, ferrous and non-ferrous metal, and much more
• There is a blade tension devise that helps improve the life of the saw blades and bearings in the cutting head
• Standard with a material stop and quick adjusting vise
• Other features include a powerful coolant system and brass chip removal wheel for cleaning chips off the blade as well as cooling the teeth before the next cut

General Specifications:

• Capacity Round – 8.85” at 90 degree
• Capacity Round – 6.5” at 45 degree
• Capacity Square – 8.85” at 90 degree
• Capacity Square – 6.5” at 45 degree
• Capacity Rectangular – 8.86” x 13.5” at 90 degree
• Capacity Rectangular – 8.86” x 6.5” at 45 degree
• Blade Size – 1” x .035” x 119.48”
• Variable Blade Speed – 82 - 259 FPM
• Blade Guide – Roller
• Miter Angle – 0 – 45 degree
• Miter Adjustment – Vise
• Descent Control – Hydraulic
• Return – Manual
• Motor – 1.5 HP
• Electrics – 220 Volt, Single Phase
• Dimensions – 68” x 30” x 43”
• Weight – 700 LBS
• Includes CSA approval

[top]

ECCO Model UE-250S-CSA Horizontal Band Saw

Features:

• Rigid cast iron cutting head and vise base that allows it to cut through 10” x 16’’ metal with ease
• Swivel Head for easy material access
• Variable Speed Control with speeds 82-259 FPM that allow the operator to control & cut various materials like plastic, ferrous and non-ferrous metal, and much more & ensure longer blade life
• There is a blade tension devise that helps improve the life of the saw blades and bearings in the cutting head
• Standard with a material stop and quick adjusting vise
• Other features include a powerful coolant system and brass chip removal wheel for cleaning chips off the blade as well as cooling the teeth before the next cut

General Specifications:

• Capacity Round – 10” at 90 degree
• Capacity Round – 8.45” at 45 degree
• Capacity Rectangular – 10” x 15” at 90 degree
• Capacity Rectangular – 10” x 8.6” at 45 degree
• Blade Size – 1” x .035” x 129.92”
• Variable Blade Speed – 82 - 259 FPM
• Swivel Head
• Blade Guide – Roller
• Miter Angle – 0 – 45 degree
• Descent Control – Hydraulic
• Return – Manual
• Motor – 2 HP
• Electrics – 220 Volt, Single Phase
• Coolant Pump System
• Dimensions – 68” x 30” x 43”
• Weight – N.W/G.W 935lbs/1078lbs
• Includes CSA approval

[top]

ECCO Model UE-250V-CSA Horizontal Band Saw

Features:

• Rigid cast iron cutting head and vise base that allows it to cut through 10” x 16’’ metal with ease
• Variable Speed Control with speeds 82-259 FPM that allow the operator to control & cut various materials like plastic, ferrous and non-ferrous metal, and much more & ensure longer blade life
• There is a blade tension devise that helps improve the life of the saw blades and bearings in the cutting head
• Standard with a material stop and quick adjusting vise
• Other features include a powerful coolant system and brass chip removal wheel for cleaning chips off the blade as well as cooling the teeth before the next cut

General Specifications:

• Capacity Round – 10” at 90 degree
• Capacity Round – 7.45” at 45 degree
• Capacity Rectangular – 13” x 18.8” at 90 degree
• Capacity Rectangular – 11” x 10” at 45 degree
• Blade Size – 1” x .035” x 129.92”
• Variable Blade Speed – 82 - 259 FPM
• Blade Guide – Roller
• Miter Angle – 0 – 45 degree
• Descent Control – Hydraulic
• Return – Manual
• Motor – 2 HP
• Electrics – 220 Volt, Single Phase
• Coolant Pump System
• Dimensions – 68” x 30” x 43”
• Weight – N.W/G.W 935lbs/1078lbs
• Includes CSA approval

[top]

ECCO Model W1318S Horizontal Band Saw

Specifications:

• Blade Motor – 3 HP
• Coolant Motor – 1/8 HP
• Electrics; 220 volt 3 phase 60Hz
• CSA APPROVED
• c/w knock down feed table
• Complete with industrial level coolant pump for longer life
• Coolant tank: 30 liter
• Quick action vise
• Fixed vise jaw has a grooved surface for camping work piece securely
• Length stopper is a standard accessory
• Blade tension adjusting gauge
• Blade size – 1.06’’ x 0.035’’ x 162.6’’
• Blade speeds – 92/137/198/256 FPM
• Shipping Dimensions – 83’’ x 37’’ x 62.8’’
• Weight: N.W / G.W 1870 lbs / 2134 lbs

Capacities:

• Rounds at 90 degrees – 13”
• Rectangular at 90 degrees – 13” x 18”
• Rounds at 45 degrees – 11”
• Rectangular at 45 degrees – 13’’ x 11’’
• Rounds at 60 degrees – 6.3’’
• Rectangular at 60 degrees – 10’’ x 6.3’’

[top]

ECCO Model KB-36 Vertical Band Saw

Specifications:

• Throat depth – 14”
• Work height – 9 1/16”
• Table size – 19 ½” x 15 ¼”
• Table inclination (4 ways) – 15”
• Saw blade length – 111 13/16”
• Saw blade width – 3/16”
• Saw blade speeds – 65-295
• Butt welder capacity – 1/8” x 5/8”
• Drive motor – 1 HP
• Weight – 675 lbs
• Dimensions – 37”L x 22”D x 72”H

Standard Accessories:

• Saw blade butt welder with integrated annealing unit
• Blade shear
• Blade grinder
• Built in blade and tire cleaning brush
• Low voltage working lamp
• One set of required tools
• One instruction and parts manual
• One supplied blade
• Includes CSA approval

Complete With The Following Options:

• Groove Table
• Rip fence & miter gauge

[top]

ECCO Model KB-45 Vertical Band Saw

Specifications:

• Throat depth – 17 15/16”
• Max. work height – 10 1/16”
• Table size – 23 ½” x 19 ½”
• Table Inclination (4 ways) – 15 degree
• Saw blade length – 141 1/8”
• Saw blade width – 1/8” to 5/8”
• Saw blade speeds – 85 to 375 fpm
• Butt welder capacity – 1/8” to 5/8”
• Drive motor – 1 hp
• Net weight – 900 lbs
• Height – 75”
• Width – 21 ½”
• Length – 41 ¾”

Standard Accessories:

• Saw blade butt welder with integrated annealing unit
• Blade shear
• Grinder
• Built in blade and wire cleaning brush
• Low voltage work lamp
• One set of required tools
• One instruction and parts manual
• Includes CSA approval

Complete With The Following Options:

• Groove Table
• Rip fence & miter gauge

[top]

E.&O.E.