Active Machinery Sales

Offers pipe bending equipment including tube bending machinery

 
Tube benders > Baileigh Tubing Benders for Sale


Baileigh Benders

Benders are machines that bend metal. We carry a full line of Baleigh rotary draw benders, roll benders, mandrel benders, and universal bender. Industrial strenth benders (bending machines) are available in various sizes, with various capacities.

 
 
Baileigh Rotary Draw benders

Baleigh RDB-150 Tube and Pipe Bender - Capacity: 2 1/2" tube

Click here to watch a video of this machine in action

Rotary Draw Benders are the typical tubing benders for almost any type of tube or pipe. Rotary draw benders work by turning the die to a specified angle while the counter die stays in a fixed position, therfore bending the work piece.

Our rotary draw benders have a maximum capacity of 3 inch Schedule 40 pipe, 3 inch square,& 4 inch tube (.185 wall mild steel).

Jim's Welding and Fabrication are extremely satisfied customers: "Our model 150 bender couldn't work better. We bend alot of square aluminum for railings. Bends look like they were bent on a mandrel bender, very satisfied."

Specifications and Capacities: RDB-150
Mild Steel Pipe (Schedule 40) 2"
Aluminum Pipe (Schedule 40) 2"
Stainless Steel Pipe (Schedule 40) 1.5"
Mild Steel Round Tube (Wall) 2.5" (.125)
Aluminum Round Tube (Wall) 2.5" (.156)
Stainless Steel Round Tube (Wall) 2.375" (.125)
Chromolly Round Tube (Wall) 2" (.125)
Mild Steel Solid Rod 1.25"
Mild Steel Square Tube (Wall) 2" (.125)
Minimum OD .25"
Maximum Speed to 180 Degrees **12/30 Seconds
Maximum Center Line Radius (CLR) *7-8"
Minimum CLR .5"
Power Requirements 110V
Weight (Lbs.) 600
Length 44"
Width 28"
Height 42"

* CLR capacity is variable depending on material; ** High Speed Model / Standard Model

Email for quote OR Call toll free: 1-877-513-1773 for details
 
Baileigh Roll Bender

Baileigh Roll Bender
Standard programmer can hold up to 170 programs with 10 bends per program

Baileigh RDB-350-S Capacity 3" Tube

P&D Metal Works, Inc. is another satisfied customer: "We have been struggling with 90° consistent bends on 2" Stainless Sch 40 Pipe, we purchased a RMD 350 bender and solved our problem. The staff was excellent to work with, they even let us bring in pipe to test the machine. Also purchased a notcher, notches fit every time, Excellent."

Specifications and Capacities: RDB-500
Mild Steel Pipe (Schedule 40) 2.5"
Aluminum Pipe (Schedule 40) 3"
Stainless Steel Pipe (Schedule 40) 2"
Mild Steel Round Tube (Wall) 3" (.187)
Aluminum Round Tube (Wall) 3.5" (.250)
Stainless Steel Round Tube (Wall) 3" (.125)
Chromolly Round Tube (Wall) 2.5" (.125)
Mild Steel Solid Rod 1.5"
Mild Steel Square Tube (Wall) 3" (.125)
Minimum OD .25"
Maximum Speed to 180 Degrees 16 Seconds
Maximum Center Line Radius (CLR) 24"
Minimum CLR .5"
Power Requirements ***220V (3-Phase)
Weight (Lbs.) 1500
Length 69"
Width 32"
Height 46"

* Other Voltages available by special order

Email for quote OR Call toll free: 1-877-513-1773 for details
 

Baileigh Roll Bender

Baileigh RDB-500 Ultimate Tube and Pipe Bender (3 1/2" tube)

A powerful tube bender for larger pipe requirements up to 4" OD tube and 3" Schedule 40 pipe. Industrial grade hydraulic systems offer years of flawless production. Mounted on wheels for portability around a jobsite or production floor. One shot bending up to 206 degrees without stopping or ratcheting.

The model 500 rotary draw bender is an ideal pipe bender for oil refineries, power stations, paper mills, converting facilities, maintenance shops, playground equipment manufacturers, shipyards, and much more.

Specifications and Capacities: RDB-500
Mild Steel Pipe (Schedule 40) 3"
Aluminum Pipe (Schedule 40) 3.5"
Stainless Steel Pipe (Schedule 40) 2.5"
Mild Steel Round Tube (Wall) 3" (.250)
Aluminum Round Tube (Wall) 3.5" (.250)
Stainless Steel Round Tube (Wall) 3.5" (.187)
Chromolly Round Tube (Wall) 3.5" (.187)
Mild Steel Solid Rod 2"
Mild Steel Square Tube (Wall) 3" (.250)
Minimum OD .25"
Maximum Speed to 180 Degrees 36 Seconds
Maximum Center Line Radius (CLR) *12-15"
Minimum CLR .5"
Power Requirements 220V (1-Phase)
Weight (Lbs.) 1800
Length 70"
Width 56"
Height 41"

* CLR capacity is variable depending on material

Email for quote OR Call toll free: 1-877-513-1773 for details
 

Baileigh Mandrel Benders

Baileigh MB-350 Mandrel Pipe and Tube Bender

This mandrel bender is the perfect machine for small to medium production runs and can be used for bending auto and bike chassis, auto aftermarket accessories, hand railing and so much more. The simple design, heavy construction and easy to use operator interface allows for quick change overs, producing quality bends and excellent production runs

Mandrel bending of pipe and tube is used where the bent pipe and tube are to have absolutely the least amount of deformation possible. The pipe and tube is supported internally with a flexible mandrel support that bends with the pipe or tube, which ensures that the interior is not deformed.

Includes:

  • Touch screen operator interface with capability to program up to 140 programs, with up to 10 bends per program.
  • 10 Foot Extraction Table
  • Rotary positioning carriage with 4 manual stops.
  • Tooling is additional per customers bending requirements. Tooling changes for different materials, wall thickness and center line radius. Set up of tooling consists of: 1 - Rotary Bending Die; 2 - Clamp Die; 3- Pressure Die; 4 - Mandrel; 5 - Wiper Die

Max Bending Strength Capacity:

  • Round Mild Steel - 3"OD x .125" Wall
  • Round Aluminum - 3"OD x .188" Wall
  • Round Stainless - 3"OD x .065" Wall
  • Square Mild Steel - 2"x2" x .188" Wall
  • Solid Bar Mild Steel - 1.181"OD

Additional Specifications:
  • Right handed mandrel pipe bender
  • Single Stack Tooling
  • Bend axis is driven by electrical mechanical drive system. Linear feed and plane of bend rotation are by rotary degree positioning carriage with linear scale and 4 manual linear stops.
  • User friendly touch screen interface allows for storage of programs, speed of bend changes, amp meter readings, counter for number of bends, and spring back values.
  • Clamp die has hydraulic and mechanical locking system that reduces the possibility of slippage.
  • Mandrel extractor uses powerful hydraulic system to insert, hold, and extract the mandrel. Also employed is an adjustable mandrel positioning device.
  • Follower die is positioned and held tight against rotary die and wiper die.
  • Foot pedal control works in conjunction with touch screen instructions. On screen safeties ensure improper operations can not be completed.
  • Maximum Bend Radius - 12" CLR
  • Maximum Angle - 190°
  • Maximum Length over Mandrel - 10"
  • Bending Speed (DOB) - 18 degrees per second
  • Accuracy of DOB - +/- 0.50°
  • Machine Weight - 2100 lb
  • 220V x 60Hz x 3 Phase


Email for quote OR Call toll free: 1-877-513-1773 for details
 
Baileigh Universal Bender

Baileigh R-M10 Roll Bender

SPECIFICATIONS: R-M10
Shaft Diameter 1.181"
Upper Roll Diameter 3.858"
Lower Roll Diameters 4.646"
Hardened Rolls for standard profiles included with machine.
Variable Speed with 2-rolls driven manually.

Capacities: R-M10 Roll Bending Machine
Mild Steel Max. Size OD/Wall   Min. Dia.
Flat Bar (Hard Way): 1.2" (.375) 20"
Flat Bar (Easy Way): 2"  (.375) 15.75"
Solid Square Rod: .75" 20"
Solid Round Rod: .875" 20"
Round Tube: 1.2"  (.078) 31.5"
Pipe: 1" Sched 40 28"
Rectangular Tube: 1.5" x.75" (.078) 39.5"
Square Tube: 1.2" (.078) 35.5"
Angle Iron (Leg Out): 1.3" x 1.3" (.157) 31.5"
T-Bar (Leg Out): 1.3" x 1.3" (.177) 24"
T-Bar (Leg In): 1.3" x 1.3" (.177) 24"
Channel (Legs Out): 1.5" x .75" (.177) 27.75"
Channel (Legs In): 1.5" x .75" (.177) 27.75"


Email for quote OR Call toll free: 1-877-513-1773 for details
 
Baileigh Universal Bender

Baileigh R-M55 Roll Bender

SPECIFICATIONS: R-M55
Shaft Diameter 50mm (1.969")
Upper Roll Diameter 148mm (5.827")
Lower Roll Diameters Variable 13.6-27.2 rpm
Hardened Rolls for standard profiles included with machine. Forward-reverse foot pedal controls, 2-rolls powered. Directly Gear Driven with Variable Speed Control..

Capacities: R-M55 Roll Bending Machine
Mild Steel Max. Size OD/Wall   Min. Dia.
Flat Bar (Hard Way): 2 1/4” (.375) 19.68”
Flat Bar (Easy Way): 3” (.60) 23.62”
Solid Square Rod: 1 3/8 ” 23.62”
Solid Round Rod: .1 3/8” 23.62”
Round Tube: 2 1/4” (.078) 47.24”
Pipe: 1 1/2” Sched 10 39”
Rectangular Tube: 2 1/4” x 1 1/8” (.078) 51.18”
Square Tube: 1 3/4” (.078) 47.24”
Angle Iron (Leg Out): 1 1/2” x 1 1/2” (.187) 23.62”
Angle Iron (Leg In): 1 1/2” x 1 1/2” (.187) 23.62”
T-Bar (Leg Out): 2” x 2” (.250) 23.62"
T-Bar (Leg In): 2” x 2” (.250) 23.62"
Channel (Legs Out): 3 1/8” 27.55"
Channel (Legs In): 3 1/8” 27.55”


Email for quote OR Call toll free: 1-877-513-1773 for details
 
Baileigh Roll Bender

Baileigh R-H45 Roll Bender

SPECIFICATIONS: R-H45
Shaft Diameter 45mm (1.7729")
Upper Roll Diameter 148mm (5.827")
Lower Roll Diameters 12 rpm
Hardened Rolls for standard profiles included with machine. Forward-reverse foot pedal controls, 3-rolls powered. Directly Gear Driven with Variable Speed Control.

Capacities: R-H45 Roll Bending Machine
Mild Steel Max. Size OD/Wall   Min. Dia.
Flat Bar (Hard Way): 3-1/4” (.393) 27.55”
Flat Bar (Easy Way): 3 7/8” (.75) 27.55”
Solid Square Rod: 1 1/2” 27.55”
Solid Round Rod: .1 1/2” 27.55”
Round Tube: 2 3/4” (.078) 59.05”
Pipe: 2” Sched 10 47.2”
Rectangular Tube: 2 3/4” x 1 1/8” (.078) 59.05”
Square Tube: 2 (.098)” 51.18”
Angle Iron (Leg Out): 1 3/4” x 1 3/4” (.196) 27.55”
Angle Iron (Leg In): 1 3/4” x 1 3/4” (.196) 27.55”
T-Bar (Leg Out): 2 1/4” x 2 1/4” (.275) 31.5”
T-Bar (Leg In): 2 1/4” x 2 1/4” (.275) 31.5”
Channel (Legs Out): 4” 31.49”
Channel (Legs In): 4” 31.49”


Email for quote OR Call toll free: 1-877-513-1773 for details